یہ فائل ویکی ذخائر کی ہے اور دیگر منصوبوں کے زیر استعمال ہوسکتی ہے۔
فائل کے صفحہ تعارف پر موجود تعارف ذیل میں موجود ہے۔
خلاصہ
تفصیلLong-wire-and-balun-0a.jpg
English: A kit to make a random wire antenna. Wire antennas are used for short wave listening, and by radio amateurs for low power transmitting, in the long wave, medium wave, and shortwave radio bands. The kit consists of a long wire attached at each end to a strain insulator. One end is attached electrically to a balun (cylinder), a small transformer which serves to match the impedance of the antenna to a coaxial cable feedline. To install the antenna, the wire is strung between two buildings or trees high above the ground, supported at the ends by rope attached to the strain insulators. A coaxial cable is attached to the connector on the balun which conducts the radio signal to a radio receiver or, in the case of transmission, feeds radio power from a radio transmitter to the antenna.
شیئر کرنے – کام کو نقل، تقسیم یا منتقل کرنے کے لیے
ریمکس کے لیے – کام منبطق کرنے کے لیے
مندرجہ ذیل شرائط کے تحت:
انتساب – آپ کو اس کام کا انتساب مصنف یا اجازت دہندہ کے بتائے گئے طریقہ کے مطابق دینا ہوگا (تاہم یہ انتساب اس طرح نہیں ہونا چاہیے کہ اسے دیکھ کر ایسا محسوس ہو کہ اصل مصنف یا اجازت دہندہ آپ کے یا آپ کے ذریعہ اس کام کے استعمال کرنے کے حامی ہیں)۔
یکساں شراکت – اگر آپ اس کام میں کوئی تبدیلی یا ترمیم کرتے ہیں یا اس کام پر مبنی کچھ نیا بناتے ہیں تو اسے بھی آپ اسی یا اس جیسے کسی اجازت نامے کے تحت شائع کر سکتے ہیں۔
{{Information |Description={{en|1=Long or random wire antenna and balun.}} |Source=Own work by uploader |Author=Adamantios |Date=2007 |Permission= |other_versions= }} <!--{{ImageUpload|full}}--> Category:Antennas