سانچہ:خانہ ستارہ پیمائی

نجوم پیمائی
{{{component1}}}
شعاعی رفتار (Rv)	{{{radial_v}}} km/s
خاص حرکت (μ)	RA: - کمیت/سال Dec.: - کمیت/سال
ظاہری ہٹاؤ (π)	{{{parallax}}} کمیت
فاصلہ	{{{dist_ly}}} نوری سال
مطلق جسامت (ایمV)	{{{absmag_v}}}
مطلق اشعاع پیمائی حجم (ایمbol)	{{{absmag_bol}}}
{{{component2}}}
شعاعی رفتار (آرv)	{{{radial_v2}}} km/s
خاص حرکت (μ)	آر اے: - کمیت/سال Dec.: - کمیت/سال
ظاہری ہٹاؤ (π)	{{{parallax2}}} کمیت
فاصلہ	{{{dist_ly2}}} نوری سال
مطلق جسامت (ایم V)	{{{absmag_v2}}}

دستاویز [نمائش] [ترمیم] [تاریخچہ] [تطہیر]

Usage

This template is part of a group of templates that are used to display information about a specific ستارہ. The list should always have {{Starbox begin}} as the first in the list, while the list should have {{Starbox end}} as the last in the list. Any of these parameters may be omitted. If all parameters that would be displayed on a given line are omitted, the line will be omitted from the infobox, except that, if dist_ly and dist_pc are omitted, but parallax is present, then the object's distance will be computed from parallax and, if present, p_error. For this calculation to work, footnotes and references for the parallax and its error should be placed in parallax_footnote rather than parallax or p_error. This particular template can be used as follows:

{{Starbox astrometry
 | radial_v = <!--Radial velocity (in km/sec)-->
 | prop_mo_ra = <!--Proper motion (RA), μ<sub>α</sub> cos δ (in milliarcsec/yr)-->
 | prop_mo_dec = <!--Proper motion (dec), μ<sub>δ</sub> (in milliarcsec/yr)-->
 | parallax = <!--Parallax (in milliarcsec)-->
 | p_error = <!--Parallax error (in milliarcsec)-->
 | parallax_footnote = <!--Parallax footnote-->
 | dist_ly = <!--Distance (in light years)-->
 | dist_pc = <!--Distance (in parsecs)-->
 | absmag_v = <!--Absolute magnitude ([[UBV photometric system|Johnson-Cousins V system]])-->
 | absmag_bol = <!--Absolute bolometric magnitude (accounts for emissions across all spectra of light)-->
 }}

However, you can use the following syntax for two stars:

{{Starbox astrometry
 | component1 = <!--Name of the first component-->
 | radial_v = <!--Radial velocity (in km/sec)-->
 | prop_mo_ra = <!--Proper motion (RA), μ<sub>α</sub> cos δ (in milliarcsec/yr)-->
 | prop_mo_dec = <!--Proper motion (dec), μ<sub>δ</sub> (in milliarcsec/yr)-->
 | parallax = <!--Parallax (in milliarcsec)-->
 | p_error = <!--Parallax error (in milliarcsec)-->
 | parallax_footnote = <!--Parallax footnote-->
 | dist_ly = <!--Distance (in light years)-->
 | dist_pc = <!--Distance (in parsecs)-->
 | absmag_v = <!--Absolute magnitude ([[UBV photometric system|Johnson-Cousins V system]])-->
 | component2 = <!--Name of the second component-->
 | radial_v2 = <!--Radial velocity (in km/sec)-->
 | prop_mo_ra2 = <!--Proper motion (RA), μ<sub>α</sub> cos δ (in milliarcsec/yr)-->
 | prop_mo_dec2 = <!--Proper motion (dec), μ<sub>δ</sub> (in milliarcsec/yr)-->
 | parallax2 = <!--Parallax (in milliarcsec)-->
 | p_error2 = <!--Parallax error (in milliarcsec)-->
 | parallax_footnote2 = <!--Parallax footnote-->
 | dist_ly2 = <!--Distance (in light years)-->
 | dist_pc2 = <!--Distance (in parsecs)-->
 | absmag_v2 = <!--Absolute magnitude ([[UBV photometric system|Johnson-Cousins V system]])-->
 }}

The following templates are used together and are usually placed in the order listed below.

{{آغاز خانہ ستارہ}}

{{خانہ ستارہ تصویر}}

{{خانہ مشاہدہ ستارہ}}

{{خانہ مشاہدہ ستارہ2}}

{{خانہ مشاہدہ ستارہ3}}

{{خانہ خصوصیات ستارہ}}

{{خانہ ستارہ پیمائی}}

{{خانہ مدار ستارہ}}

{{خانہ تفصیلات ستارہ}}

{{خانہ فہرست ستارہ}}

{{خانہ حوالہ ستارہ}}

{{خانہ مآخذ معلومات ستارہ}}

{{اختتام خانہ ستارہ}}